Variolock 5.0mm Locking Head Cancellous Screw Full Thread – Self Tapping – Hex Drive
| S.NO | CORRESPONDING INSTRUMENTS TO BE USE: | Cat. No. |
|---|---|---|
| 1 | Drill Bit S.S. Quick Coupling end Dia. 4.3mm x 221mm Long Calibrated | 260.430 |
| 2 | LCP Drill Sleeve 5.0mm For Drill Bit 4.3mm | 803.110 |
| 3 | Hexagonal Screw Driver with Self Holding Forceps (for 5.0mm Locking Head & 5.0mm Locking Cancellous Screws) | 301.029 |
| 4 | Q.C. Torque Screw Driver Handle 3.5mm Tip (Torque 4.0Nm) | 804.164 |
| 5 | Hexagonal Screw Driver Q.C end Shaft – 3.5mm Tip (for Torque Handle 4.0Nm) | 804.170 |
Description
| Cat No. | Length | Cat No. |
| Stainless Steel | Titanium | |
| 111.725 | 25 MM | Ti.111.725 |
| 111.730 | 30 MM | Ti.111.730 |
| 111.735 | 35 MM | Ti.111.735 |
| 111.740 | 40 MM | Ti.111.740 |
| 111.745 | 45 MM | Ti.111.745 |
| 111.750 | 50 MM | Ti.111.750 |
| 111.755 | 55 MM | Ti.111.755 |
| 111.760 | 60 MM | Ti.111.760 |
| 111.765 | 65 MM | Ti.111.765 |
| 111.770 | 70 MM | Ti.111.770 |
| 111.775 | 75 MM | Ti.111.775 |
| 111.780 | 80 MM | Ti.111.780 |
| 111.785 | 85 MM | Ti.111.785 |
| 111.790 | 90 MM | Ti.111.790 |
| 111.795 | 95 MM | Ti.111.795 |
| 111.800 | 100 MM | Ti.111.800 |
| 111.805 | 105 MM | Ti.111.805 |
| 111.810 | 110 MM | Ti.111.810 |
