Siora Surgicals Pvt. Ltd. offers an advanced range of Bipolar Hip Prosthesis designed to restore mobility and improve patient outcomes in hip replacement procedures. Engineered with precision, these bipolar hip implants ensure optimal articulation, reduced wear, and enhanced stability. Manufactured using high-quality, biocompatible stainless steel, our bipolar prostheses are suitable for treating femoral neck fractures and other hip joint conditions. Available under three different categories, Accuhip, Flexhip, and Endurehip, and both fenestrated & non-fenestrated configurations, each bipolar hip implant reflects our commitment to quality, safety, and consistent performance in the operating room. With a focus on durability and ease of implantation, Siora continues to support orthopedic surgeons with solutions they can trust for effective and long-lasting hip reconstruction.
Bipolar hip implants are designed with an inner and outer bearing system that allows smooth dual-motion articulation, helping improve joint mobility and reduce wear on the acetabulum.
The bipolar implant structure supports better hip stability and helps lower the chances of post-operative dislocation, especially in elderly and low-mobility patients.
By distributing movement across two articulating surfaces, bipolar hip implants help minimize direct stress on the acetabular cartilage and reduce long-term erosion.
Manufactured using high-quality biocompatible materials, the bipolar hip implants are designed to ensure accurate fit, reliable fixation, and long-term mechanical performance.
The polished head design and optimized articulation system contribute to smoother hip movement and improved patient comfort during daily activities.
Widely used in bipolar hip hemiarthroplasty for femoral neck fractures, these bipolar implants offer an effective solution for restoring hip function and enabling early mobilization.
Commonly indicated for displaced intracapsular femoral neck fractures, especially in elderly patients requiring reliable hip joint restoration.
Used for bipolar hip hemiarthroplasty surgeries where replacement of the femoral head is required while preserving the natural acetabulum.
Suitable for patients with weakened or osteoporotic bone where stable fixation and early mobilization are clinically important.
Indicated in selected cases of avascular necrosis involving collapse or severe damage to the femoral head structure.
Can be recommended for certain degenerative hip conditions causing pain, restricted movement, and compromised joint function.
Used in revision surgeries where previous internal fixation of proximal femur fractures has failed or resulted in nonunion complications.
We manufacture different types of bipolar hip implants to suit different patient anatomies and hip conditions. From standard stem to narrow stem and from fenestrated to non-fenestrated, have a look at our range of bipolar prostheses:
This sterile non-fenestrated bipolar hip implant prosthesis is developed to provide stable hip reconstruction with optimized load distribution. Its standard stem design ensures secure implantation and reliable functionality, making it suitable for hemiarthroplasty procedures requiring long-term implant performance.
| Cat No. | Dia (mm) |
| 900.137 – 900.153 | 37 – 53 |
Designed for reliable hip joint replacement procedures, this sterile bipolar prosthesis features a standard fenestrated stem that supports cement interlocking and enhanced fixation stability. Engineered for durability and smooth articulation, it helps restore mobility while ensuring dependable clinical performance.
| Cat No. | Dia (mm) |
| 900.237 – 900.253 | 37 – 53 |
This sterile narrow stem bipolar prosthesis is intended for hemiarthroplasty procedures where precise femoral canal fitting is essential. The non-fenestrated design provides structural strength and controlled load transfer for improved implant stability and patient mobility.
| Cat No. | Dia (mm) |
| 900.037 – 900.051 | 37 – 51 |
Specially designed for patients with narrower femoral canals, this sterile fenestrated narrow stem prosthesis enables effective cement anchorage and stable fixation. It supports smooth joint movement while offering anatomical compatibility and dependable outcomes in hip replacement surgeries.
| Cat No. | Dia (mm) |
| 900.337 – 900.351 | 37 – 51 |
Engineered for complex hip reconstruction cases, this sterile extra-long stem prosthesis offers extended femoral support and enhanced stability. Its non-fenestrated structure ensures strength and durability, making it suitable for revision and challenging orthopedic procedures.
| Cat No. | Dia (mm) | Length (mm) |
| 900.437 – 900.445 | 37 – 45 | 240 |
| 900.447 – 900.453 | 47 – 53 | 260 |
The Endure Hip Bipolar Prosthesis features a non-fenestrated sterile design developed for secure hip joint replacement procedures. Manufactured using high-quality implant-grade stainless steel, it promotes smooth articulation, reliable fixation, and long-lasting performance during hemiarthroplasty treatments.
| Cat No. | Dia (mm) | Size |
| 900.537 – 900.539 | 37 – 39 | Small Stem |
| 900.541 – 900.547 | 41 – 47 | Medium Stem |
| 900.549 – 900.553 | 49 – 53 | Large Stem |
Designed for effective cemented fixation, this sterile fenestrated bipolar prosthesis supports enhanced implant stability and reliable hip reconstruction outcomes. Its precision-engineered structure allows smooth articulation while helping surgeons achieve dependable alignment and long-term implant performance.
| Cat No. | Dia (mm) | Size |
| 900.737 – 900.739 | 37 – 39 | Small Stem |
| 900.741 – 900.747 | 41 – 47 | Medium Stem |
| 900.749 – 900.753 | 49 – 53 | Large Stem |
This sterile Flexhip Bipolar Prosthesis comes with a standard non-fenestrated stem for stable hip joint replacement procedures. Designed for durability and functional mobility restoration, it offers dependable fixation and smooth articulation for consistent orthopedic performance.
| Cat No. | Dia (mm) |
| 900.837 – 900.853 | 37 – 53 |
Featuring a fenestrated standard stem, this sterile Flexhip Bipolar Prosthesis is developed to improve cement meshing and implant stability. Its anatomically optimized design helps ensure effective load transfer, smooth movement, and reliable outcomes in hemiarthroplasty procedures.
| Cat No. | Dia (mm) |
| 900.937 – 900.953 | 37 – 53 |
The instrument set for Flexhip Bipolar is designed to assist surgeons during hip replacement procedures with precision and efficiency. It includes procedure-specific instruments that support accurate implant placement, simplified handling, and streamlined surgical workflow in orthopedic operations.
| Cat No. IS.205 | Description | Units |
| 386.040 | Moore Hollow Chisel | 1 |
| 386.062 | Measuring Gauge For Prosthesis ( Set of 10) 37mm to 55mm | 1 |
| 386.070 | Impactor – Nylon Faced | 1 |
| 904.105 | Pencil Reamer – For Bipolar Prosthesis | 1 |
| 904.106 | Tapered Reamer – For Bipolar Prosthesis | 1 |
| 904.107 | Slotted Reamer – For Bipolar Prosthesis | 1 |
| 904.119 | Trial Cup For Dia.37mm | 1 |
| 904.120 | Trial Cup For Dia.39mm | 1 |
| 904.121 | Trial Cup For Dia.41mm | 1 |
| 904.122 | Trial Cup For Dia.43mm | 1 |
| 904.123 | Trial Cup For Dia.45mm | 1 |
| 904.124 | Trial Cup For Dia.47mm | 1 |
| 904.125 | Trial Cup For Dia.49mm | 1 |
| 904.126 | Trial Cup For Dia.51mm | 1 |
| 904.127 | Trial Cup For Dia.53mm | 1 |
| 904.134 | Holder / Pusher For Trial Cup | 1 |
| 904.133 | Impactor – Extractor For Bipolar Prosthesis | 1 |
| 904.139 | Rasp With Tomy Bar for Flexhip Bipolar Prosthesis | 1 |
| 904.140 | Flexhip Bipolar Trial Stem – S.S. | 1 |
| 713.007 | Detachable Slide Hammer 400 gms – Silicon Handle | 1 |
| 400.084 | Graphic Aluminium Box for Bipolar Instrument Set with Two Trays | 1 |
The Instruments Set for Endure Hip Bipolar is designed to support precise implant positioning and efficient surgical workflow during hip replacement procedures, ensuring reliable handling, procedural accuracy, and ease of operation for surgeons.
| Cat No. IS.206 | Description | Units |
| 386.040 | Moore Hollow Chisel | 1 |
| 386.062 | Measuring Gauge For Prosthesis ( Set of 10) 37mm to 55mm | 1 |
| 386.070 | Impactor – Nylon Faced | 1 |
| 904.105 | Pencil Reamer – For Bipolar Prosthesis | 1 |
| 904.106 | Tapered Reamer – For Bipolar Prosthesis | 1 |
| 904.107 | Slotted Reamer – For Bipolar Prosthesis | 1 |
| 904.119 | Trial Cup For Dia.37mm | 1 |
| 904.120 | Trial Cup For Dia.39mm | 1 |
| 904.121 | Trial Cup For Dia.41mm | 1 |
| 904.122 | Trial Cup For Dia.43mm | 1 |
| 904.123 | Trial Cup For Dia.45mm | 1 |
| 904.124 | Trial Cup For Dia.47mm | 1 |
| 904.125 | Trial Cup For Dia.49mm | 1 |
| 904.126 | Trial Cup For Dia.51mm | 1 |
| 904.127 | Trial Cup For Dia.53mm | 1 |
| 904.134 | Holder / Pusher For Trial Cup | 1 |
| 904.133 | Impactor – Extractor For Bipolar Prosthesis | 1 |
| 904.138 | Rasp With Tomy Bar for Endure Hip Bipolar Prosthesis | 1 |
| 904.141 | Endurehip Bipolar Trial Stem – S.S. Small | 1 |
| 904.142 | Endurehip Bipolar Trial Stem – S.S. Medium | 1 |
| 904.143 | Endurehip Bipolar Trial Stem – S.S. Large | 1 |
| 713.007 | Detachable Slide Hammer 400 gms – Silicon Handle | 1 |
| 400.084 | Graphic Aluminium Box for Bipolar Instrument Set with Two Trays | 1 |
Developed for use with Accuhip Bipolar Prosthesis systems, this instrument set helps facilitate accurate preparation, alignment, and implantation during hip surgeries. Manufactured for reliability and ease of use, it supports efficient surgical performance and procedural accuracy.
| Cat. No. IS.058 | Instruments Set for Accuhip Bipolar | Units |
| 386.040 | Moore Hollow Chisel | 1 |
| 386.062 | Measuring Gauge For Prosthesis ( Set of 10) 37mm to 55mm | 1 |
| 386.070 | Impactor – Nylon Faced | 1 |
| 904.100 | Rasp With Tomy Bar For Bipolar Prosthesis – Narrow Stem | 1 |
| 904.101 | Rasp With Tomy Bar For Bipolar Prosthesis – Standard Stem | 1 |
| 904.105 | Pencil Reamer – For Bipolar Prosthesis | 1 |
| 904.106 | Tapered Reamer – For Bipolar Prosthesis | 1 |
| 904.107 | Slotted Reamer – For Bipolar Prosthesis | 1 |
| 904.119 | Trial Cup For Dia.37mm | 1 |
| 904.120 | Trial Cup For Dia.39mm | 1 |
| 904.121 | Trial Cup For Dia.41mm | 1 |
| 904.122 | Trial Cup For Dia.43mm | 1 |
| 904.123 | Trial Cup For Dia.45mm | 1 |
| 904.124 | Trial Cup For Dia.47mm | 1 |
| 904.125 | Trial Cup For Dia.49mm | 1 |
| 904.126 | Trial Cup For Dia.51mm | 1 |
| 904.127 | Trial Cup For Dia.53mm | 1 |
| 904.134 | Holder / Pusher For Trial Cup | 1 |
| 904.133 | mpactor – Extractor For Bipolar Prosthesis | 1 |
| 904.110 | Bipolar Trial Stem – S.S. Standard Stem | 1 |
| 904.111 | Bipolar Trial Stem – S.S. Narrow Stem | 1 |
| 713.007 | Detachable Slide Hammer 400 Gms. – Silicon Handle | 1 |
| 400.084 | Graphic Aluminium Box for Bipolar Instrument Set with Two Trays | 1 |
Siora Surgicals Pvt. Ltd. manufactures a complete range of bipolar hip prosthesis systems including fixed bipolar prosthesis, bipolar hemiarthroplasty implants, femoral stems, and hip arthroplasty implant systems under brands like Accuhip, Endure Hip, and Flexhip.
Accuhip, Endure Hip, and Flexhip are Siora’s specialized hip prosthesis product lines developed for different surgical preferences, fixation requirements, and anatomical needs in hip hemiarthroplasty procedures.
Yes, Siora manufactures bipolar hemiarthroplasty implants and exports them globally to orthopedic distributors, hospitals, and healthcare companies.
Yes, Siora Surgicals Pvt. Ltd. provides OEM and private label manufacturing services for bipolar hip prosthesis systems and orthopedic implants for global distributors and medical brands.
Siora uses medical-grade stainless steel for the manufacturing of bipolar hip prosthesis systems to ensure durability, biocompatibility, and long-term implant performance.
Yes, sterile packaging options are available for bipolar hip implants, depending on distributor requirements and regulatory market needs.
Yes, distributors can request customized branding, packaging, labeling, and OEM manufacturing support for Accuhip, Endure Hip, Flexhip, and other orthopedic implant systems.
Yes, Siora provides implant and instrument sets for bipolar hip prosthesis systems, including dedicated surgical instruments for Accuhip, Endure Hip, and Flexhip product lines.
Siora offers multiple stem sizes, head sizes, and configuration options to support different patient anatomies and surgical requirements.
Yes, Siora exports orthopedic implants to more than 50 countries and continues expanding its global distributor network.
If you are interested in our products and want to know more details, please leave message here, we will reply you as soon as we can.