| Cat No. IS.103 |
Description |
Units |
| 185.156 |
Kirschner Wire with Trocar Tip Dia. 2.0mm, Length 150mm |
3 |
| 260.320 |
Drill Bit – S.S. – Quick Coupling End Dia. 3.2mm X 130mm Long |
1 |
| 260.430 |
Drill Bit – S.S. – Quick Coupling End Dia. 4.3mm X 221mm Long – Calibrated |
1 |
| 264.040 |
Bone Tap – Quick Coupling End Dia. 4.5mm, Thread Length 70mm, Total Length 125mm |
1 |
| 301.030 |
Hexagonal Screw Driver with Self Holding Sleeve 3.5mm Tip (for 4.5mm Cortical & 6.5mm Cancellous Screw) |
1 |
| 303.020 |
Large Depth Gauge |
1 |
| 304.020 |
Large Neutral & Loaded Drill Guide |
1 |
| XP.306.010 |
Quick Coupling Handle T-Type |
1 |
| 340.030 |
Self Centering Bone Holding Forceps 240mm |
2 |
| 341.030 |
Reduction forceps – Serrated Speed Lock -170mm |
1 |
| 342.060 |
Reduction Forceps – Pointed Speed Lock – 240mm |
1 |
| 379.025 |
Hohmann Retractor 8mm Wide, Short Narrow Tip, 220mm Length |
2 |
| 382.008 |
Periosteal Elevator – Curved 8mm |
1 |
| 382.012 |
Periosteal Elevator – Curved 12mm |
1 |
| 803.105 |
LCP Universal Drill Guide 4.5/5.0mm |
1 |
| 803.110 |
LCP Drill Sleeve 5.0mm for Drill Bit 4.3mm |
3 |
| 803.115 |
LCP Guide Sleeve for 2.0mm K. Wires |
1 |
| 803.120 |
LCP Bending Iron for Re-Construction Plate (Use in Pairs) for 3.5 & 4.5 LCP Plate |
1 |
| 804.164 |
Q.C. Torque Screw Driver Handle 3.5mm Tip (Torque 4.0Nm) |
1 |
| 804.170 |
Hexagonal Screw Driver Q.C. End Shaft, 3.5mm Tip ( for Torque Handle 4.0N.M.) |
1 |
| 400.075 |
Graphic Box for Large Fragment Locking System |
1 |
